How To Install Ram In Hp Pavilion G6
I get commissions for purchases made through links in this post.
Installing an SSD or whatever other SATA-three storage drive is pretty easy in HP Pavilion G6 series laptops. Unlike other types of laptops, the hard disk drive can be replaced or removed without having to open up the whole bottom console.
Most of the G6 laptops similar 2032TX and 2100 Notebooks can support SATA ii.5″ SSD. The process will be very easy to follow as compared to the latest HP laptops.
In this commodity, I volition tell yous nearly the whole installation process stride past footstep. As well, by the cease of this commodity, we volition clone the OS from your old HDD to the new SSD in your G6. Yet, yous can install the new OS once the setup is finished.
But, before diving in to the actual installation procedure, I accept another thing to talk over with you.
Which SSD you can install on your HP Pavilion G6 laptop?
The pavilion G6 is an old serial. I withal run into some G6 models from 2022 and 2022 as well. So, if you lot want, you can increment your G6's performance with an SSD upgrade. Now, I must tell you that the G6 laptops can only support the SATA-iii SSDs (maximum). No Thousand.2 SATA or G.ii NVMe slot will is vacant on the motherboard for M.2 SSD installation.
So, you can buy a new SATA SSD or install whatever other if y'all accept one with you. Just, do non invest in an M.2 considering it won't fit within information technology.
If y'all want to get more than information on all the supported hardware components, you can run across the user manual of HP G6. Now, allow'south jump into the actual process.
Read my brief SSD buyer's guide to brand this decision wisely.
Best SATA ii.5″ SSDs for HP Pavillion G6 Laptop
| Prototype | Model | Features and Specs | Price |
|---|---|---|---|
 | Samsung 870 Evo | Capacity: 250GB – 4TB Interface:SATA Speed: 550/510 MB/s Endurance:2,400 TBW | Check Price |
 | Crucial MX500 | Capacity: 250GB – 4TB Interface:SATA Speed: 560/530 MB/s Endurance:Upwardly to 700 TBW | Check Toll |
Is information technology good to make an SSD+HDD Philharmonic using the DVD Drive?
Yes, information technology is possible to with this laptop. You can buy a hard drive caddy and install information technology at the place of your DVD driver. I have discussed the whole procedure of HDD+SSD Combo in this article.
Steps to install the SSD in HP Pavilion G6
Notation: Make certain to follow the steps systematically till the end for the all-time results.
1. Accept a data backup
Before proceeding further, I would strongly recommend your having a data backup of your hard disk. There are very few chances of losing data in this procedure but still, it'due south good to use skilful software for data backup or do it manually.
ii. Prepare tools and turn off your laptop
The back cover will exist tightened using the 63 screws. So, you must have Philips P0 and P1 screwdrivers with y'all. Information technology will be skilful if yous accept a consummate laptop screwdriver kit with you.
Along with this, make sure to identify your laptop on a flat surface. It will be adept if you make yourself free from any static energy earlier starting the installation process. For that, touch any metallic surface.
One time everything is done, just remove all the cords including the power cable from the laptop. Now, the next step will be to remove the bombardment. Once you removed it, press and concur the ability push button for seconds so that any residual ability gets purged.
iii. Open the Back Console
Grab your screwdriver and showtime opening the screws given on the back console. Meet the image below for a improve agreement. You will have to slide the 50-shaped cover to the downside then that it tin can be free from the locks.
Once the console is opened, yous will see iii different ports and hardware components. The starting time 1 will exist the network card, the 2d i will be the RAM, and finally the biggest component will be your difficult bulldoze. We are going to replace it with the SSD.
four. Disconnect and remove the difficult drive
Just push the hard disk drive frontwards (from the opposite direction of its connection) and grab it up. It will come out as information technology is. Now, remove the SATA cable from the drive gently.
After that, you will have to remove the front and dorsum bumpers from your drive as shown in the paradigm. Afterwards that, remove the iv PM 3.0×iii.v screws from the sides. This will free your hard drive from its subclass chassis.
v. Connect and install the SSD
Now, take hold of your brackets and the SSD and tighten it through the screw holes with the same screws y'all but removed. In one case the chassis is fix, install both bumpers to your SSD body. Now, connect the SATA cablevision to your SSD simply similar information technology was continued to the HDD.
Fit it inside the same hard disk crenel and you are done. Reverse the same process then that the back console is fit exactly it was at that place earlier the opening.
How to clone your existing Bone to the newly installed SSD in HP Pavilion G6 Laptop?
I have discussed the same matter in various other manufactures on this blog. But, I am going to aid you with the aforementioned again this one besides. So, let's starting time.
Notation: If you take an original Windows Installation media with you lot, just install Windows from get-go for the best results. But, if you want to go on things equally it is, merely follow the process below.
ane. Kicking your system from hard drive externally
Because your laptop has only ane hard drive port, the just mode to grab all the OS data is past using the USB port. So, for that, you lot will demand an SATA to USB cord. But connect its SATA side to your difficult drive and the USB side to your laptop's USB port (Preferably USB three.0 or whatsoever latest).
Now, once the hard drive is connected to the system and the SSD is also inside the laptop, we can outset the process. So, the first footstep will be to enter the BIOS and kick your arrangement from the hard drive once more.
Just press the ESC button while your system is booting upward and you lot will enter the BIOS. Get to the organization configuration menu and enable the Legacy Back up On. Now, go the BOOT settings and brand certain the boot priority is set to the hard drive connected through the USB. Just relieve the settings and leave.
2. Mount the SSD (If Required)
If your organization has recognized the newly installed SSD, simply skip this step and go to the adjacent one. But, if non, make sure to mountain information technology first,
In Windows systems, it is required to mount your new drive and create its partitions if yous want. Without mounting the new drive, your arrangement will not recognize it for anything.
Then, just follow this procedure to mount your SSD.
- Printing Windows key+R to open the Run dialog
- Within Run, type diskmgmt.msc and hit Enter
- Now, right-click on your SSD (Unallocated) and striking New Simple Volume or Initialize Disk
- Now, you can make partitions if you want, otherwise, just continue with Yep for all the dialog boxes.
iii. Install the Macrium Reflect Software and clone your Os
Become to this link and install the Gratis Macrium Reflect Software which will help you clone all your Os and other data to your new drive. Once the software is fired, yous will see your OS drive and the SSD drive beneath it. Make sure to check the box given with the source disk.
Just press Clone this disk and in the next dialog, select your SSD where you see select a disk to clone to.
At present, if you lot want to clone the entire disk, but click copy selected partitions. If you lot just want to movement the Os, elevate and drib the volumes which have the Windows icon with them.
Click Terminate and wait for the cloning process to stop. See this video for a amend agreement.
4. Alter the Boot priority once more to your SSD
Once the cloning is finished, your SSD is ready to be used equally your OS and storage drive. In fact, both of your drives take Bone files and you tin can use anyone to boot your organisation from. But, you will now accept to enter your BIOS again and change your boot priority to the SSD and that'south it.
If you are confused with the BIOS, just watch a YouTube video like this and you volition take everything cleared.
How to do a clean Windows Install in your new SSD?
Below is the process of installing and activating the new Windows in your HP Pavilion G6 Laptop.
1. Create Windows Media Creation tool
For this process, yous will need a pen bulldoze/DVD in which you tin can make your bootable media drive. Consider having 8GB infinite at least in your DVD/pen drive. Make certain to format this bulldoze before using information technology.
Download Windows Media Cosmos Tool for the Windows version of your involvement. The tool is available for Windows 7, eight.1. and ten.
2. Install the Media creation tool on your pen drive/DVD
Once the download is finished, open up this tool. Choose the option Create installation media for some other PC. Cull the pen drive equally your destination drive and let the Windows get downloaded within it.
3. Enter the BIOS/UEFI and modify boot device
At present, enter the BIOS/UEFI and disable Fast Boot and Secure Boot options. Just press F2 multiple times while the system is starting up and you will enter the UEFI.
- Go to the Advance Mode (F7) and go to the Boot tab. At present disable the Fast boot optionorthward.
2. Now, go to the Security tab and disable the secure kicking Command choice.
3. Lastly, in gild to load your system from the pen drive, become to Boot Menu and select your pen drive or DVD where the Windows is downloaded.
If your laptop is opening with a normal BIOS menu, go to the Boot tab and move the pen drive/DVD to the top to make it your boot drive. See the image beneath
4. Install and actuate the Windows
The Windows Setup volition start.
When you reach the carte, Where practice you want to install Windows?, merely cull your SSD and press Next. (You will probably see unallocated with your SSD). Do bulldoze partitions if required. If not, you can get further, and then the Windows will get installed. Once the installation is finished, you can remove your bootable DVD or Pen Drive.
If you have an activation key, just follow this process and activate the Windows.
- Become to Windows Control Panel.
- Click on Arrangement and security. So select System.
- Click "Get more than features with a new edition ofWindows".
- Select "I already take aproduct key".
- Thenenter yourproduct fundamental and click on Next.
For more information on Windows activation, visit this page.
Final Verdict
I promise you were able to replace your HDD with a fast SSD in your HP Pavilion G6 laptop. If you lot have any other questions in listen, just go far touch with me.
Thanks for reading.
Source: https://ssdsphere.com/how-to-install-an-ssd-in-hp-pavilion-g6-laptop/
Posted by: schumacherhichaveste.blogspot.com
0 Response to "How To Install Ram In Hp Pavilion G6"
Post a Comment